The Authority SuiteRuck AuthorityKit AuthorityAperture AuthoritySprout AuthorityDrone Authority
The Journal

Making by hand.

AllMakingProduction
Knitting Needle Sizes: Metric, US, and UK Conversion
Reference

Knitting Needle Sizes: Metric, US, and UK Conversion

A full metric-to-US-to-old-UK knitting needle conversion chart, and why the metric millimetre size is the one to trust.

8 min read
Knitting Gauge and Tension, Explained
Reference

Knitting Gauge and Tension, Explained

What gauge is, how to knit and measure a swatch, and how to adjust needle size when your gauge is off.

8 min read
Knit vs Purl: The Two Stitches Everything Is Built From
Reference

Knit vs Purl: The Two Stitches Everything Is Built From

What the knit and purl stitches are, how they differ, and how combining them makes stockinette, garter, ribbing, and seed stitch.

8 min read
How to Read a Knitting Pattern
Reference

How to Read a Knitting Pattern

Every knitting abbreviation, bracket, and asterisk explained, plus the US/UK differences and how to read a chart.

10 min read
How to Fix a Dropped Stitch in Knitting
Reference

How to Fix a Dropped Stitch in Knitting

How to catch, ladder up, and rescue a dropped stitch in stockinette, garter, and ribbing before it runs.

8 min read
How to Cast On in Knitting: The Main Methods Compared
Reference

How to Cast On in Knitting: The Main Methods Compared

Long-tail, knitted, cable, and provisional cast-ons compared on stretch, edge firmness, and when to use each.

9 min read
How to Bind Off (Cast Off) in Knitting
Reference

How to Bind Off (Cast Off) in Knitting

The standard bind-off, stretchy bind-offs for ribbing, and how to keep the edge from pulling in too tight.

8 min read
Yarn Weights Explained: The 0-7 Standard Chart
Reference

Yarn Weights Explained: The 0-7 Standard Chart

The Craft Yarn Council's 0-7 system in one table, plus how to read wraps per inch when a yarn has no label at all.

7 min read
Sewing Machine Needle Guide: Sizes, Types, and What Fits Your Fabric
Reference

Sewing Machine Needle Guide: Sizes, Types, and What Fits Your Fabric

How needle sizing works, which needle type matches which fabric, and how to tell when it's time to swap the needle out.

8 min read
Seam Finishes: A Complete Guide
Reference

Seam Finishes: A Complete Guide

Seven ways to finish a raw seam edge, what each one is for, and how to pick the right one by fabric weight, tools on hand, and whether the seam will show.

9 min read
Natural vs Synthetic Fibers: What the Difference Means for Your Fabric
Fabric Basics

Natural vs Synthetic Fibers: What the Difference Means for Your Fabric

Natural and synthetic fibers behave differently because of where they come from. Here's how to tell them apart and pick the right one for a project.

8 min read
How to Read a Sewing Pattern
Reference

How to Read a Sewing Pattern

The envelope, the size charts, the symbols on the tissue, and the cutting layout, all explained in one place.

9 min read
How to Read a Crochet Pattern
Reference

How to Read a Crochet Pattern

Every abbreviation, symbol, and bracket in a crochet pattern explained, plus the US/UK term swap that trips up most makers.

9 min read
How to Identify Fabric with a Burn Test
Reference

How to Identify Fabric with a Burn Test

A burn test tells you what a mystery fabric is made of by watching how a small swatch reacts to flame, smoke, and ash.

8 min read
Crochet Hook Sizes: Conversion Chart
Reference

Crochet Hook Sizes: Conversion Chart

The full US, metric, and UK hook size chart in one table, plus which hook to grab for the yarn weight you're holding.

6 min read
Fabric Weight, Explained: What GSM Means for Drape and Wear
Fabric Basics

Fabric Weight, Explained: What GSM Means for Drape and Wear

GSM tells you how a fabric will drape, wear, and sew before you cut into it. Here's how to read the number and pick the right weight for your project.

6 min read
Best Beginner Crochet Hooks, 2026
Gear Picks

Best Beginner Crochet Hooks, 2026

Four hook types compared on grip, glide, and price, so your first project isn't fighting the tool as well as the stitch.

7 min read