Compare two to four resources
Compare textile resources.
Review access, scope, source evidence, and limitations side by side before choosing what to inspect next.
This is a working table, not a ranking, recommendation, or provider approval.
Selected resources
4 resources selected.
Swipe the table sideways to inspect all 4 routes
| Decision field | Open accessSample Review & Approval RecordGlobalRemove | Open accessZDHC Manufacturing Restricted Substances ListGlobalRemove | Open accessPattern Grading & Size-Run Validation RecordGlobalRemove | Open accessFreeSewingGlobalRemove |
|---|---|---|---|---|
| Decision fit | ||||
| Primary job | Source production | Check standards | Find patterns & fit | Find patterns & fit |
| Also useful for | No additional job recorded | No additional job recorded | No additional job recorded | No additional job recorded |
| Area | Production | Standards | Patterns & fit | Patterns & fit |
| Best for | Approving a named sample without accidentally approving bulk | Chemical-input controls during manufacturing | Auditing inherited grade rules or controlling a new multi-size pattern release from approved targets through sample evidence | Custom-fit home sewing patterns |
| Know before using | The record does not validate every size or user, prove bulk conformity, prescribe universal defect classes or AQL, replace testing or inspection, or establish compliance. | The MRSL controls manufacturing inputs within its stated scope. One formulation status or self-generated facility inventory report does not by itself prove a complete or externally verified chemical inventory, actual order recipe, implementation, worker protection, emissions, wastewater performance, or finished-product compliance. Verify the current version, law, brand program, safety rules, formulation identity and status, complete facility and order records, inventory-verification state, and finished-product RSL and testing requirements. | The record does not create a production grade, supply universal increments or breakpoints, validate a CAD file or fit population, reproduce licensed standards, or replace qualified anthropometric, pattern, technical-design, fit, quality, accessibility, safety, statistical, and user-research review. | A generated pattern is not independent fit evidence or a production-ready graded block. The result still depends on accurate measurements, the selected design and options, ease assumptions, fabric behavior, construction, and representative test garments. An account stores saved patterns and measurement sets, so review the platform's privacy terms before retaining personal measurements. |
| Practical access | ||||
| For | Apparel brands | Apparel brands | Apparel brands | Makers |
| Location or jurisdiction | Global | Global | Global | Global |
| Access | Open access | Open access | Open access | Open access |
| Format | Stitch Authority | Reference | Stitch Authority | Software |
| Source type | Stitch Authority | Industry organization | Stitch Authority | Open-source project |
| Source and review | ||||
| What the source establishes | The record applies version and lot controls from textile testing plus current ISO and ASQ acceptance-sampling boundaries to separate sample approval from bulk release. | ZDHC's current scope defines the MRSL as restrictions on intentional use of listed substances in commercial chemical formulations for textile, leather, rubber, foam, adhesive, and trim processing. Covered inputs include cleaners, dyes, auxiliaries, coatings, finishing agents, maintenance, wastewater-treatment, sanitation, and pest-control chemicals. ZDHC identifies version 3.1 as the current official MRSL, distinguishes formulation conformance from finished-product restrictions, and states that an ordinary Performance InCheck facility inventory is self-generated rather than externally verified. | The guide cites current ISO body-table, size-designation, and garment-measurement boundaries plus two peer-reviewed studies that tested the relationship between conventional grade rules, anthropometric evidence, and garment fit; it requires product-specific target deltas and validation instead of publishing universal increments. | FreeSewing's official documentation says the browser editor drafts a selected design in real time from a measurement set rather than scaling or grading a standard-size pattern. Users can adjust design options and export the generated result, including as PDF; saving the pattern to an account is optional and is used to revisit it later. |
| Linked page reviewed | Jul 15, 2026 | Jul 30, 2026 | Jul 27, 2026 | Jul 21, 2026 |
| Next review due | Jul 15, 2027 | Oct 28, 2026 | Jul 27, 2027 | Jan 17, 2027 |
| Inspect | ||||
How to compare
Use the rows to narrow your next check.
- Choose resources that could solve the same job.
- Eliminate access, scope, or jurisdiction mismatches.
- Read each limitation before following the source.
- Verify project-specific claims with the source or provider.