Compare two to four resources
Compare textile resources.
Review access, scope, source evidence, and limitations side by side before choosing what to inspect next.
This is a working table, not a ranking, recommendation, or provider approval.
Selected resources
4 resources selected.
Swipe the table sideways to inspect all 4 routes
| Decision field | Open accessZDHC Manufacturing Restricted Substances ListGlobalRemove | Open accessKnitting Needle to Crochet Hook Size ChartGlobalRemove | Open accessAustralia Basic Patternmaking CompetencyAustralia · OceaniaRemove | Open accessPattern Grading & Size-Run Validation RecordGlobalRemove |
|---|---|---|---|---|
| Decision fit | ||||
| Primary job | Check standards | Learn techniques | Find patterns & fit | Find patterns & fit |
| Also useful for | No additional job recorded | No additional job recorded | No additional job recorded | No additional job recorded |
| Area | Standards | Yarn | Patterns & fit | Patterns & fit |
| Best for | Chemical-input controls during manufacturing | Finding the current CYC hook and needle aliases that share one known nominal metric diameter before confirming project gauge | Scoping training, hiring, assessment, or evidence requirements for basic textile-product pattern development and testing in Australia | Auditing inherited grade rules or controlling a new multi-size pattern release from approved targets through sample evidence |
| Know before using | The MRSL controls manufacturing inputs within its stated scope. It does not by itself prove a facility's chemical inventory, implementation, worker protection, emissions, wastewater performance, formulation conformance, or finished-product compliance. Verify the current version, law, brand program, safety rules, chemical-product certificates and status, facility records, and finished-product RSL and testing requirements. | A shared nominal diameter does not make a knitting needle and crochet hook interchangeable or predict equal gauge or fabric. The reference is not a physical measurement, manufacturer inspection, UK or Canadian conversion, steel-hook chart, tool recommendation, yarn assignment, or project approval. | This is a competency and assessment reference, not an instructional course, pattern file, qualification by reading, provider recommendation, professional license, or proof that a person can perform the work. The route does not establish enrollment availability, teaching quality, fees, support, recognition outside Australia, or product-specific fit. Confirm the current unit status, packaging rules, prerequisites, registered provider, assessment conditions, local requirements, and actual evidence before relying on it. | The record does not create a production grade, supply universal increments or breakpoints, validate a CAD file or fit population, reproduce licensed standards, or replace qualified anthropometric, pattern, technical-design, fit, quality, accessibility, safety, statistical, and user-research review. |
| Practical access | ||||
| For | Apparel brands | Makers | Both | Apparel brands |
| Location or jurisdiction | Global | Global | Australia · Oceania | Global |
| Access | Open access | Open access | Open access | Open access |
| Format | Reference | Stitch Authority | Reference | Stitch Authority |
| Source type | Industry organization | Stitch Authority | Official registry | Stitch Authority |
| Source and review | ||||
| What the source establishes | ZDHC's current scope defines the MRSL as restrictions on intentional use of listed substances in commercial chemical formulations for textile, leather, rubber, foam, adhesive, and trim processing. Covered inputs include cleaners, dyes, auxiliaries, coatings, finishing agents, maintenance, wastewater-treatment, sanitation, and pest-control chemicals. ZDHC's help centre identifies version 3.1 as the current official MRSL and distinguishes it from restrictions measured in finished products. | Rechecked July 28, 2026. The lookup reproduces the current public Craft Yarn Council metric and U.S. alias rows, aligns hooks and needles only when their nominal millimetre value matches, and leaves missing rows or aliases unfilled. | Australia's National Training Register publishes current unit MSTAT3002, Develop patterns using basic patternmaking principles. The release document describes interpreting textile-product design specifications, considering fabric performance, selecting tools and equipment, developing patterns, testing the result, and making alterations. Release 1 was generated December 22, 2022 and merged two earlier units. Current Australian apparel and live-production qualifications list MSTAT3002, while the current diploma also exposes advanced individual-fit, alteration, and fit-model units. | The guide cites current ISO body-table, size-designation, and garment-measurement boundaries plus two peer-reviewed studies that tested the relationship between conventional grade rules, anthropometric evidence, and garment fit; it requires product-specific target deltas and validation instead of publishing universal increments. |
| Linked page reviewed | Jul 21, 2026 | Jul 28, 2026 | Jul 16, 2026 | Jul 27, 2026 |
| Next review due | Oct 19, 2026 | Jul 28, 2027 | Oct 14, 2026 | Jul 27, 2027 |
| Inspect | ||||
How to compare
Use the rows to narrow your next check.
- Choose resources that could solve the same job.
- Eliminate access, scope, or jurisdiction mismatches.
- Read each limitation before following the source.
- Verify project-specific claims with the source or provider.