Compare two to four resources
Compare textile resources.
Review access, scope, source evidence, and limitations side by side before choosing what to inspect next.
This is a working table, not a ranking, recommendation, or provider approval.
Selected resources
4 resources selected.
Swipe the table sideways to inspect all 4 routes
| Decision field | Open accessZDHC Manufacturing Restricted Substances ListGlobalRemove | Open accessFreeSewingGlobalRemove | Quote-basedLectra ModarisGlobalRemove | Open accessPattern Grading & Size-Run Validation RecordGlobalRemove |
|---|---|---|---|---|
| Decision fit | ||||
| Primary job | Check standards | Find patterns & fit | Find patterns & fit | Find patterns & fit |
| Also useful for | No additional job recorded | No additional job recorded | No additional job recorded | No additional job recorded |
| Area | Standards | Patterns & fit | Patterns & fit | Patterns & fit |
| Best for | Chemical-input controls during manufacturing | Custom-fit home sewing patterns | Enterprise pattern rooms and supplier file exchange | Auditing inherited grade rules or controlling a new multi-size pattern release from approved targets through sample evidence |
| Know before using | The MRSL controls manufacturing inputs within its stated scope. One formulation status or self-generated facility inventory report does not by itself prove a complete or externally verified chemical inventory, actual order recipe, implementation, worker protection, emissions, wastewater performance, or finished-product compliance. Verify the current version, law, brand program, safety rules, formulation identity and status, complete facility and order records, inventory-verification state, and finished-product RSL and testing requirements. | A generated pattern is not independent fit evidence or a production-ready graded block. The result still depends on accurate measurements, the selected design and options, ease assumptions, fabric behavior, construction, and representative test garments. An account stores saved patterns and measurement sets, so review the platform's privacy terms before retaining personal measurements. | The page does not publish price and its product-quality, error-prevention, data-loss, and fit statements are vendor claims. Capabilities vary across Essential, Classic, Expert, 3D, and add-ons. Confirm licenses, modules, support, system and file requirements, then pilot approved blocks, grade rules, supplier reopen, material and mannequin data, plot or cut outputs, and risk-appropriate physical fit and production checks. | The record does not create a production grade, supply universal increments or breakpoints, validate a CAD file or fit population, reproduce licensed standards, or replace qualified anthropometric, pattern, technical-design, fit, quality, accessibility, safety, statistical, and user-research review. |
| Practical access | ||||
| For | Apparel brands | Makers | Apparel brands | Apparel brands |
| Location or jurisdiction | Global | Global | Global | Global |
| Access | Open access | Open access | Quote-based | Open access |
| Format | Reference | Software | Software | Stitch Authority |
| Source type | Industry organization | Open-source project | First-party platform | Stitch Authority |
| Source and review | ||||
| What the source establishes | ZDHC's current scope defines the MRSL as restrictions on intentional use of listed substances in commercial chemical formulations for textile, leather, rubber, foam, adhesive, and trim processing. Covered inputs include cleaners, dyes, auxiliaries, coatings, finishing agents, maintenance, wastewater-treatment, sanitation, and pest-control chemicals. ZDHC identifies version 3.1 as the current official MRSL, distinguishes formulation conformance from finished-product restrictions, and states that an ordinary Performance InCheck facility inventory is self-generated rather than externally verified. | FreeSewing's official documentation says the browser editor drafts a selected design in real time from a measurement set rather than scaling or grading a standard-size pattern. Users can adjust design options and export the generated result, including as PDF; saving the pattern to an account is optional and is used to revisit it later. | Lectra's current Modaris page identifies version 2025.2 as the latest listed release and describes a one- to three-year subscription with two releases per year. The modular range covers base-pattern creation and modification, grading and industrialization, native-file supplier work, pattern libraries, synchronized 2D and 3D prototypes, configurable or imported mannequins, and separate conversion and consumption-estimate add-ons. | The guide cites current ISO body-table, size-designation, and garment-measurement boundaries plus two peer-reviewed studies that tested the relationship between conventional grade rules, anthropometric evidence, and garment fit; it requires product-specific target deltas and validation instead of publishing universal increments. |
| Linked page reviewed | Jul 30, 2026 | Jul 21, 2026 | Jul 21, 2026 | Jul 27, 2026 |
| Next review due | Oct 28, 2026 | Jan 17, 2027 | Jan 17, 2027 | Jul 27, 2027 |
| Inspect | ||||
How to compare
Use the rows to narrow your next check.
- Choose resources that could solve the same job.
- Eliminate access, scope, or jurisdiction mismatches.
- Read each limitation before following the source.
- Verify project-specific claims with the source or provider.