Compare two to four resources
Compare textile resources.
Review access, scope, source evidence, and limitations side by side before choosing what to inspect next.
This is a working table, not a ranking, recommendation, or provider approval.
Selected resources
4 resources selected.
Swipe the table sideways to inspect all 4 routes
| Decision field | Open accessZDHC Manufacturing Restricted Substances ListGlobalRemove | Open accessAustralia Basic Patternmaking CompetencyAustralia · OceaniaRemove | Open accessTech Pack Definition, Contents & LimitsGlobalRemove | Free downloadSeamly2DGlobalRemove |
|---|---|---|---|---|
| Decision fit | ||||
| Primary job | Check standards | Find patterns & fit | Source production | Find patterns & fit |
| Also useful for | No additional job recorded | No additional job recorded | No additional job recorded | No additional job recorded |
| Area | Standards | Patterns & fit | Production | Patterns & fit |
| Best for | Chemical-input controls during manufacturing | Scoping training, hiring, assessment, or evidence requirements for basic textile-product pattern development and testing in Australia | Understanding what a tech pack must control before using a template or releasing work | Digital pattern drafting |
| Know before using | The MRSL controls manufacturing inputs within its stated scope. It does not by itself prove a facility's chemical inventory, implementation, worker protection, emissions, wastewater performance, formulation conformance, or finished-product compliance. Verify the current version, law, brand program, safety rules, chemical-product certificates and status, facility records, and finished-product RSL and testing requirements. | This is a competency and assessment reference, not an instructional course, pattern file, qualification by reading, provider recommendation, professional license, or proof that a person can perform the work. The route does not establish enrollment availability, teaching quality, fees, support, recognition outside Australia, or product-specific fit. Confirm the current unit status, packaging rules, prerequisites, registered provider, assessment conditions, local requirements, and actual evidence before relying on it. | An orientation rather than a completed product record; it does not supply a universal format, licensed standard content, measurements, tolerances, construction settings, labels, approvals, compliance conclusion, or product-release authority. | Patternmaking knowledge, controlled measurement files, production conventions, and sewn fit testing are still required. The software does not validate body measurements, ease, balance, grading rules, fabric behavior, construction, or product fit. The project currently labels its user wiki manual as needing updates, so confirm current commands and file behavior against the installed release and active support channels. |
| Practical access | ||||
| For | Apparel brands | Both | Apparel brands | Both |
| Location or jurisdiction | Global | Australia · Oceania | Global | Global |
| Access | Open access | Open access | Open access | Free download |
| Format | Reference | Reference | Stitch Authority | Software |
| Source type | Industry organization | Official registry | Stitch Authority | Open-source project |
| Source and review | ||||
| What the source establishes | ZDHC's current scope defines the MRSL as restrictions on intentional use of listed substances in commercial chemical formulations for textile, leather, rubber, foam, adhesive, and trim processing. Covered inputs include cleaners, dyes, auxiliaries, coatings, finishing agents, maintenance, wastewater-treatment, sanitation, and pest-control chemicals. ZDHC's help centre identifies version 3.1 as the current official MRSL and distinguishes it from restrictions measured in finished products. | Australia's National Training Register publishes current unit MSTAT3002, Develop patterns using basic patternmaking principles. The release document describes interpreting textile-product design specifications, considering fabric performance, selecting tools and equipment, developing patterns, testing the result, and making alterations. Release 1 was generated December 22, 2022 and merged two earlier units. Current Australian apparel and live-production qualifications list MSTAT3002, while the current diploma also exposes advanced individual-fit, alteration, and fit-model units. | The guide cites published ISO sources for documented-information, garment-measurement, stitch, and seam boundaries plus current U.S. FTC textile and care-labeling guidance; it discloses that ISO 10013:2021's 2026 systematic review is at close-of-review stage and separates every cited authority from product-specific technical and market decisions. | The maintained Seamly2D repository identifies the application as GPLv3+ open-source patternmaking software for Windows, macOS, and Linux. It reads multi-size measurement files for standardized sizes and individual measurement files for custom-fit work, publishes downloadable builds and releases, and links an active website and user forum. |
| Linked page reviewed | Jul 21, 2026 | Jul 16, 2026 | Jul 27, 2026 | Jul 21, 2026 |
| Next review due | Oct 19, 2026 | Oct 14, 2026 | Jul 27, 2027 | Jan 17, 2027 |
| Inspect | ||||
How to compare
Use the rows to narrow your next check.
- Choose resources that could solve the same job.
- Eliminate access, scope, or jurisdiction mismatches.
- Read each limitation before following the source.
- Verify project-specific claims with the source or provider.