Compare two to four resources
Compare textile resources.
Review access, scope, source evidence, and limitations side by side before choosing what to inspect next.
This is a working table, not a ranking, recommendation, or provider approval.
Selected resources
4 resources selected.
Swipe the table sideways to inspect all 4 routes
| Decision field | Open accessZDHC Manufacturing Restricted Substances ListGlobalRemove | Open accessAustralia Basic Patternmaking CompetencyAustralia · OceaniaRemove | Free accountFOURSOURCE Supplier NetworkGlobalRemove | Open accessSeam Allowance ConverterGlobalRemove |
|---|---|---|---|---|
| Decision fit | ||||
| Primary job | Check standards | Find patterns & fit | Source production | Find patterns & fit |
| Also useful for | No additional job recorded | No additional job recorded | No additional job recorded | No additional job recorded |
| Area | Standards | Patterns & fit | Production | Patterns & fit |
| Best for | Chemical-input controls during manufacturing | Scoping training, hiring, assessment, or evidence requirements for basic textile-product pattern development and testing in Australia | Searching global apparel and textile production capabilities | Translating a seam allowance already stated by a pattern or controlled specification |
| Know before using | The MRSL controls manufacturing inputs within its stated scope. It does not by itself prove a facility's chemical inventory, implementation, worker protection, emissions, wastewater performance, formulation conformance, or finished-product compliance. Verify the current version, law, brand program, safety rules, chemical-product certificates and status, facility records, and finished-product RSL and testing requirements. | This is a competency and assessment reference, not an instructional course, pattern file, qualification by reading, provider recommendation, professional license, or proof that a person can perform the work. The route does not establish enrollment availability, teaching quality, fees, support, recognition outside Australia, or product-specific fit. Confirm the current unit status, packaging rules, prerequisites, registered provider, assessment conditions, local requirements, and actual evidence before relying on it. | The company count is a changing platform claim. Search fields, profiles, certificates, locations, and account access do not independently verify the legal entity, factory ownership, capability, capacity, certificate validity or scope, compliance performance, delivery, or project fit. Confirm the site and subcontracting, credentials with issuers, samples, audits when appropriate, specifications, contracts, and commercial terms. | This is a unit-translation reference. It does not select, approve, or change a seam allowance; establish a universal fraction; interpret an unstated cutting or stitching line; or replace the exact pattern version, controlled specification, material and seam evidence, sample, production method, equipment, tolerance, or release authority. |
| Practical access | ||||
| For | Apparel brands | Both | Apparel brands | Both |
| Location or jurisdiction | Global | Australia · Oceania | Global | Global |
| Access | Open access | Open access | Free account | Open access |
| Format | Reference | Reference | Marketplace | Stitch Authority |
| Source type | Industry organization | Official registry | Commercial marketplace | Stitch Authority |
| Source and review | ||||
| What the source establishes | ZDHC's current scope defines the MRSL as restrictions on intentional use of listed substances in commercial chemical formulations for textile, leather, rubber, foam, adhesive, and trim processing. Covered inputs include cleaners, dyes, auxiliaries, coatings, finishing agents, maintenance, wastewater-treatment, sanitation, and pest-control chemicals. ZDHC's help centre identifies version 3.1 as the current official MRSL and distinguishes it from restrictions measured in finished products. | Australia's National Training Register publishes current unit MSTAT3002, Develop patterns using basic patternmaking principles. The release document describes interpreting textile-product design specifications, considering fabric performance, selecting tools and equipment, developing patterns, testing the result, and making alterations. Release 1 was generated December 22, 2022 and merged two earlier units. Current Australian apparel and live-production qualifications list MSTAT3002, while the current diploma also exposes advanced individual-fit, alteration, and fit-model units. | FOURSOURCE's current public network page presents an operator-reported global company count and country or territory search. It says logged-in users can narrow results by compliance certificates, product groups, fabric types, target groups, minimum order quantities, and other fields, with a free-trial and supplier sign-up route. | NIST states that one inch is exactly 25.4 millimetres, and the SI decimal relationship makes one centimetre equal to 10 millimetres. The tool uses those factors, displays rounded equivalents, exposes the size difference to the nearest 1/16 inch when converting to inches, and preserves valid value, source-unit, and target-unit state in the URL. |
| Linked page reviewed | Jul 21, 2026 | Jul 16, 2026 | Jul 21, 2026 | Jul 28, 2026 |
| Next review due | Oct 19, 2026 | Oct 14, 2026 | Jan 17, 2027 | Jul 28, 2027 |
| Inspect | ||||
How to compare
Use the rows to narrow your next check.
- Choose resources that could solve the same job.
- Eliminate access, scope, or jurisdiction mismatches.
- Read each limitation before following the source.
- Verify project-specific claims with the source or provider.