Compare two to four resources
Compare textile resources.
Review access, scope, source evidence, and limitations side by side before choosing what to inspect next.
This is a working table, not a ranking, recommendation, or provider approval.
Selected resources
3 resources selected.
Swipe the table sideways to inspect all 3 routes
| Decision field | Open accessTech Pack Definition, Contents & LimitsGlobalRemove | Open accessQUT TextileR Knowledge BaseAustralia · OceaniaRemove | Quote-basedLectra ModarisGlobalRemove |
|---|---|---|---|
| Decision fit | |||
| Primary job | Source production | Choose materials | Find patterns & fit |
| Also useful for | No additional job recorded | No additional job recorded | No additional job recorded |
| Area | Production | Materials | Patterns & fit |
| Best for | Understanding what a tech pack must control before using a template or releasing work | Comparing common fibre types and blends by typical use and care before choosing a project material, then following the cited source when the decision needs testing or current claim evidence | Enterprise pattern rooms and supplier file exchange |
| Know before using | An orientation rather than a completed product record; it does not supply a universal format, licensed standard content, measurements, tolerances, construction settings, labels, approvals, compliance conclusion, or product-release authority. | This is a general educational reference, not a neutral material ranking, complete fibre encyclopedia, specification, test report, sourcing database, lifecycle assessment, certification, safety procedure, or proof of a product claim. Coverage and citation depth vary by page, and some environmental, care, performance, or end-of-life statements are broad. Fibre name alone does not establish a fabric's construction, blend percentage, finish, quality, behavior, or suitability. Confirm the exact composition, construction, finish, care label, sample behavior, test evidence, certification scope, and project requirements with the responsible supplier, scheme, laboratory, or specialist. | The page does not publish price and its product-quality, error-prevention, data-loss, and fit statements are vendor claims. Capabilities vary across Essential, Classic, Expert, 3D, and add-ons. Confirm licenses, modules, support, system and file requirements, then pilot approved blocks, grade rules, supplier reopen, material and mannequin data, plot or cut outputs, and risk-appropriate physical fit and production checks. |
| Practical access | |||
| For | Apparel brands | Both | Apparel brands |
| Location or jurisdiction | Global | Australia · Oceania | Global |
| Access | Open access | Open access | Quote-based |
| Format | Stitch Authority | Reference | Software |
| Source type | Stitch Authority | First-party platform | First-party platform |
| Source and review | |||
| What the source establishes | The guide cites published ISO sources for documented-information, garment-measurement, stitch, and seam boundaries plus current U.S. FTC textile and care-labeling guidance; it discloses that ISO 10013:2021's 2026 systematic review is at close-of-review stage and separates every cited authority from product-specific technical and market decisions. | The live QUT index says the knowledge base is designed to help users choose an appropriate textile and extend garment use. It links 14 topics: nine named fibre pages, textile blends, re-making, reuse, recycling, and repair. Checked silk, polyester, wool, and blend pages organize information under overview, common fabrics, context of use, care, recycling, and further reading where applicable. QUT identifies TextileR as a research group and publishes named researchers, publications, objectives, and a direct contact. | Lectra's current Modaris page identifies version 2025.2 as the latest listed release and describes a one- to three-year subscription with two releases per year. The modular range covers base-pattern creation and modification, grading and industrialization, native-file supplier work, pattern libraries, synchronized 2D and 3D prototypes, configurable or imported mannequins, and separate conversion and consumption-estimate add-ons. |
| Linked page reviewed | Jul 27, 2026 | Jul 26, 2026 | Jul 21, 2026 |
| Next review due | Jul 27, 2027 | Jan 22, 2027 | Jan 17, 2027 |
| Inspect | |||
How to compare
Use the rows to narrow your next check.
- Choose resources that could solve the same job.
- Eliminate access, scope, or jurisdiction mismatches.
- Read each limitation before following the source.
- Verify project-specific claims with the source or provider.