Compare two to four resources
Compare textile resources.
Review access, scope, source evidence, and limitations side by side before choosing what to inspect next.
This is a working table, not a ranking, recommendation, or provider approval.
Selected resources
3 resources selected.
Swipe the table sideways to inspect all 3 routes
| Decision field | Open accessTech Pack Definition, Contents & LimitsGlobalRemove | Open accessNMSU Pattern Alteration GuideUnited States · North AmericaRemove | Open accessSeam Allowance ConverterGlobalRemove |
|---|---|---|---|
| Decision fit | |||
| Primary job | Source production | Find patterns & fit | Find patterns & fit |
| Also useful for | No additional job recorded | No additional job recorded | No additional job recorded |
| Area | Production | Patterns & fit | Patterns & fit |
| Best for | Understanding what a tech pack must control before using a template or releasing work | Checking a common flat-pattern alteration method | Translating a seam allowance already stated by a pattern or controlled specification |
| Know before using | An orientation rather than a completed product record; it does not supply a universal format, licensed standard content, measurements, tolerances, construction settings, labels, approvals, compliance conclusion, or product-release authority. | The guide's general womenswear diagrams and ease ranges are teaching examples, not an individual diagnosis, current commercial-pattern specification, or complete fitting course. A named symptom can have several causes, and alterations may affect adjoining seams, facings, collars, sleeves, balance, and style. Verify the method against the exact pattern and test the coordinated changes on a muslin. | This is a unit-translation reference. It does not select, approve, or change a seam allowance; establish a universal fraction; interpret an unstated cutting or stitching line; or replace the exact pattern version, controlled specification, material and seam evidence, sample, production method, equipment, tolerance, or release authority. |
| Practical access | |||
| For | Apparel brands | Makers | Both |
| Location or jurisdiction | Global | United States · North America | Global |
| Access | Open access | Open access | Open access |
| Format | Stitch Authority | Reference | Stitch Authority |
| Source type | Stitch Authority | Government guidance | Stitch Authority |
| Source and review | |||
| What the source establishes | The guide cites published ISO sources for documented-information, garment-measurement, stitch, and seam boundaries plus current U.S. FTC textile and care-labeling guidance; it discloses that ISO 10013:2021's 2026 systematic review is at close-of-review stage and separates every cited authority from product-specific technical and market decisions. | New Mexico State University's current Cooperative Extension Guide C-228 explains three alteration methods, folding out fullness, slashing and spreading or overlapping, and redrawing darts or seams. It provides illustrated bodice, sleeve, skirt, and trouser examples and tells readers to compare body measurements plus intended ease with the pattern while preserving grain, design lines, related-piece changes, and comfort ease. | NIST states that one inch is exactly 25.4 millimetres, and the SI decimal relationship makes one centimetre equal to 10 millimetres. The tool uses those factors, displays rounded equivalents, exposes the size difference to the nearest 1/16 inch when converting to inches, and preserves valid value, source-unit, and target-unit state in the URL. |
| Linked page reviewed | Jul 27, 2026 | Jul 21, 2026 | Jul 28, 2026 |
| Next review due | Jul 27, 2027 | Oct 19, 2026 | Jul 28, 2027 |
| Inspect | |||
How to compare
Use the rows to narrow your next check.
- Choose resources that could solve the same job.
- Eliminate access, scope, or jurisdiction mismatches.
- Read each limitation before following the source.
- Verify project-specific claims with the source or provider.