Compare two to four resources
Compare textile resources.
Review access, scope, source evidence, and limitations side by side before choosing what to inspect next.
This is a working table, not a ranking, recommendation, or provider approval.
Selected resources
3 resources selected.
Swipe the table sideways to inspect all 3 routes
| Decision field | Open accessSeam Allowance ConverterGlobalRemove | Open accessTech Pack Definition, Contents & LimitsGlobalRemove | Open accessPattern Grading & Size-Run Validation RecordGlobalRemove |
|---|---|---|---|
| Decision fit | |||
| Primary job | Find patterns & fit | Source production | Find patterns & fit |
| Also useful for | No additional job recorded | No additional job recorded | No additional job recorded |
| Area | Patterns & fit | Production | Patterns & fit |
| Best for | Translating a seam allowance already stated by a pattern or controlled specification | Understanding what a tech pack must control before using a template or releasing work | Auditing inherited grade rules or controlling a new multi-size pattern release from approved targets through sample evidence |
| Know before using | This is a unit-translation reference. It does not select, approve, or change a seam allowance; establish a universal fraction; interpret an unstated cutting or stitching line; or replace the exact pattern version, controlled specification, material and seam evidence, sample, production method, equipment, tolerance, or release authority. | An orientation rather than a completed product record; it does not supply a universal format, licensed standard content, measurements, tolerances, construction settings, labels, approvals, compliance conclusion, or product-release authority. | The record does not create a production grade, supply universal increments or breakpoints, validate a CAD file or fit population, reproduce licensed standards, or replace qualified anthropometric, pattern, technical-design, fit, quality, accessibility, safety, statistical, and user-research review. |
| Practical access | |||
| For | Both | Apparel brands | Apparel brands |
| Location or jurisdiction | Global | Global | Global |
| Access | Open access | Open access | Open access |
| Format | Stitch Authority | Stitch Authority | Stitch Authority |
| Source type | Stitch Authority | Stitch Authority | Stitch Authority |
| Source and review | |||
| What the source establishes | NIST states that one inch is exactly 25.4 millimetres, and the SI decimal relationship makes one centimetre equal to 10 millimetres. The tool uses those factors, displays rounded equivalents, exposes the size difference to the nearest 1/16 inch when converting to inches, and preserves valid value, source-unit, and target-unit state in the URL. | The guide cites published ISO sources for documented-information, garment-measurement, stitch, and seam boundaries plus current U.S. FTC textile and care-labeling guidance; it discloses that ISO 10013:2021's 2026 systematic review is at close-of-review stage and separates every cited authority from product-specific technical and market decisions. | The guide cites current ISO body-table, size-designation, and garment-measurement boundaries plus two peer-reviewed studies that tested the relationship between conventional grade rules, anthropometric evidence, and garment fit; it requires product-specific target deltas and validation instead of publishing universal increments. |
| Linked page reviewed | Jul 28, 2026 | Jul 27, 2026 | Jul 27, 2026 |
| Next review due | Jul 28, 2027 | Jul 27, 2027 | Jul 27, 2027 |
| Inspect | |||
How to compare
Use the rows to narrow your next check.
- Choose resources that could solve the same job.
- Eliminate access, scope, or jurisdiction mismatches.
- Read each limitation before following the source.
- Verify project-specific claims with the source or provider.