Compare two to four resources
Compare textile resources.
Review access, scope, source evidence, and limitations side by side before choosing what to inspect next.
This is a working table, not a ranking, recommendation, or provider approval.
Selected resources
2 resources selected.
Swipe the table sideways to inspect all 2 routes
| Decision field | Open accessSewing Length ConverterGlobalRemove | Open accessQUT TextileR Knowledge BaseAustralia · OceaniaRemove |
|---|---|---|
| Decision fit | ||
| Primary job | Find patterns & fit | Choose materials |
| Also useful for | No additional job recorded | No additional job recorded |
| Area | Patterns & fit | Materials |
| Best for | Translating a length already stated by a pattern, controlled specification, sewing tool, or seam allowance | Comparing common fibre types and blends by typical use and care before choosing a project material, then following the cited source when the decision needs testing or current claim evidence |
| Know before using | This is a length-unit translation reference. It does not identify the measured feature; select, approve, or change a seam allowance; establish a universal fraction; interpret an unstated cutting or stitching line; or replace the exact pattern version, controlled specification, material and seam evidence, sample, production method, equipment, tolerance, or release authority. | This is a general educational reference, not a neutral material ranking, complete fibre encyclopedia, specification, test report, sourcing database, lifecycle assessment, certification, safety procedure, or proof of a product claim. Coverage and citation depth vary by page, and some environmental, care, performance, or end-of-life statements are broad. Fibre name alone does not establish a fabric's construction, blend percentage, finish, quality, behavior, or suitability. Confirm the exact composition, construction, finish, care label, sample behavior, test evidence, certification scope, and project requirements with the responsible supplier, scheme, laboratory, or specialist. |
| Practical access | ||
| For | Both | Both |
| Location or jurisdiction | Global | Australia · Oceania |
| Access | Open access | Open access |
| Format | Stitch Authority | Reference |
| Source type | Stitch Authority | First-party platform |
| Source and review | ||
| What the source establishes | NIST states that 10 millimetres equal 1 centimetre and that one inch is exactly 25.4 millimetres. The tool uses those relationships, displays rounded equivalents, exposes the size difference to the nearest 1/16 inch when converting to inches, and preserves valid value, source-unit, and target-unit state in the URL. | The live QUT index says the knowledge base is designed to help users choose an appropriate textile and extend garment use. It links 14 topics: nine named fibre pages, textile blends, re-making, reuse, recycling, and repair. Checked silk, polyester, wool, and blend pages organize information under overview, common fabrics, context of use, care, recycling, and further reading where applicable. QUT identifies TextileR as a research group and publishes named researchers, publications, objectives, and a direct contact. |
| Linked page reviewed | Jul 30, 2026 | Jul 26, 2026 |
| Next review due | Jul 30, 2027 | Jan 22, 2027 |
| Inspect | ||
How to compare
Use the rows to narrow your next check.
- Choose resources that could solve the same job.
- Eliminate access, scope, or jurisdiction mismatches.
- Read each limitation before following the source.
- Verify project-specific claims with the source or provider.