Compare two to four resources
Compare textile resources.
Review access, scope, source evidence, and limitations side by side before choosing what to inspect next.
This is a working table, not a ranking, recommendation, or provider approval.
Selected resources
3 resources selected.
Swipe the table sideways to inspect all 3 routes
| Decision field | Open accessSeam Allowance ConverterGlobalRemove | PaidPatternLab LondonGlobalRemove | Open accessPattern Grading & Size-Run Validation RecordGlobalRemove |
|---|---|---|---|
| Decision fit | |||
| Primary job | Find patterns & fit | Find patterns & fit | Find patterns & fit |
| Also useful for | No additional job recorded | No additional job recorded | No additional job recorded |
| Area | Patterns & fit | Patterns & fit | Patterns & fit |
| Best for | Translating a seam allowance already stated by a pattern or controlled specification | Generating an editable custom-measurement block | Auditing inherited grade rules or controlling a new multi-size pattern release from approved targets through sample evidence |
| Know before using | This is a unit-translation reference. It does not select, approve, or change a seam allowance; establish a universal fraction; interpret an unstated cutting or stitching line; or replace the exact pattern version, controlled specification, material and seam evidence, sample, production method, equipment, tolerance, or release authority. | A measurement-generated draft is a starting block, not independent evidence of body capture, comfort, mobility, balance, garment ease, or production fit. The result depends on measurement accuracy, supported ranges, formula assumptions, selected options, and output handling. Review the service's privacy terms before storing body data and sew a representative toile before design, grading, or production use. | The record does not create a production grade, supply universal increments or breakpoints, validate a CAD file or fit population, reproduce licensed standards, or replace qualified anthropometric, pattern, technical-design, fit, quality, accessibility, safety, statistical, and user-research review. |
| Practical access | |||
| For | Both | Both | Apparel brands |
| Location or jurisdiction | Global | Global | Global |
| Access | Open access | Paid | Open access |
| Format | Stitch Authority | Software | Stitch Authority |
| Source type | Stitch Authority | First-party platform | Stitch Authority |
| Source and review | |||
| What the source establishes | NIST states that one inch is exactly 25.4 millimetres, and the SI decimal relationship makes one centimetre equal to 10 millimetres. The tool uses those factors, displays rounded equivalents, exposes the size difference to the nearest 1/16 inch when converting to inches, and preserves valid value, source-unit, and target-unit state in the URL. | PatternLab London's current drafting page says a user creates a measurement profile, selects a basic block or sloper, adjusts fit, dart placement, length, seam allowance, and sleeve options, then downloads the generated result as tiled PDF, AI, or SVG. The live catalogue names bodice, dress, trouser, and stretch blocks and displays a price before purchase. | The guide cites current ISO body-table, size-designation, and garment-measurement boundaries plus two peer-reviewed studies that tested the relationship between conventional grade rules, anthropometric evidence, and garment fit; it requires product-specific target deltas and validation instead of publishing universal increments. |
| Linked page reviewed | Jul 28, 2026 | Jul 21, 2026 | Jul 27, 2026 |
| Next review due | Jul 28, 2027 | Jan 17, 2027 | Jul 27, 2027 |
| Inspect | |||
How to compare
Use the rows to narrow your next check.
- Choose resources that could solve the same job.
- Eliminate access, scope, or jurisdiction mismatches.
- Read each limitation before following the source.
- Verify project-specific claims with the source or provider.