Compare two to four resources
Compare textile resources.
Review access, scope, source evidence, and limitations side by side before choosing what to inspect next.
This is a working table, not a ranking, recommendation, or provider approval.
Selected resources
4 resources selected.
Swipe the table sideways to inspect all 4 routes
| Decision field | Open accessFreeSewingGlobalRemove | Open accessAustralia Basic Patternmaking CompetencyAustralia · OceaniaRemove | Open accessKnitting Needle to Crochet Hook Size ChartGlobalRemove | Open accessSeam Allowance ConverterGlobalRemove |
|---|---|---|---|---|
| Decision fit | ||||
| Primary job | Find patterns & fit | Find patterns & fit | Learn techniques | Find patterns & fit |
| Also useful for | No additional job recorded | No additional job recorded | No additional job recorded | No additional job recorded |
| Area | Patterns & fit | Patterns & fit | Yarn | Patterns & fit |
| Best for | Custom-fit home sewing patterns | Scoping training, hiring, assessment, or evidence requirements for basic textile-product pattern development and testing in Australia | Finding the current CYC hook and needle aliases that share one known nominal metric diameter before confirming project gauge | Translating a seam allowance already stated by a pattern or controlled specification |
| Know before using | A generated pattern is not independent fit evidence or a production-ready graded block. The result still depends on accurate measurements, the selected design and options, ease assumptions, fabric behavior, construction, and representative test garments. An account stores saved patterns and measurement sets, so review the platform's privacy terms before retaining personal measurements. | This is a competency and assessment reference, not an instructional course, pattern file, qualification by reading, provider recommendation, professional license, or proof that a person can perform the work. The route does not establish enrollment availability, teaching quality, fees, support, recognition outside Australia, or product-specific fit. Confirm the current unit status, packaging rules, prerequisites, registered provider, assessment conditions, local requirements, and actual evidence before relying on it. | A shared nominal diameter does not make a knitting needle and crochet hook interchangeable or predict equal gauge or fabric. The reference is not a physical measurement, manufacturer inspection, UK or Canadian conversion, steel-hook chart, tool recommendation, yarn assignment, or project approval. | This is a unit-translation reference. It does not select, approve, or change a seam allowance; establish a universal fraction; interpret an unstated cutting or stitching line; or replace the exact pattern version, controlled specification, material and seam evidence, sample, production method, equipment, tolerance, or release authority. |
| Practical access | ||||
| For | Makers | Both | Makers | Both |
| Location or jurisdiction | Global | Australia · Oceania | Global | Global |
| Access | Open access | Open access | Open access | Open access |
| Format | Software | Reference | Stitch Authority | Stitch Authority |
| Source type | Open-source project | Official registry | Stitch Authority | Stitch Authority |
| Source and review | ||||
| What the source establishes | FreeSewing's official documentation says the browser editor drafts a selected design in real time from a measurement set rather than scaling or grading a standard-size pattern. Users can adjust design options and export the generated result, including as PDF; saving the pattern to an account is optional and is used to revisit it later. | Australia's National Training Register publishes current unit MSTAT3002, Develop patterns using basic patternmaking principles. The release document describes interpreting textile-product design specifications, considering fabric performance, selecting tools and equipment, developing patterns, testing the result, and making alterations. Release 1 was generated December 22, 2022 and merged two earlier units. Current Australian apparel and live-production qualifications list MSTAT3002, while the current diploma also exposes advanced individual-fit, alteration, and fit-model units. | Rechecked July 28, 2026. The lookup reproduces the current public Craft Yarn Council metric and U.S. alias rows, aligns hooks and needles only when their nominal millimetre value matches, and leaves missing rows or aliases unfilled. | NIST states that one inch is exactly 25.4 millimetres, and the SI decimal relationship makes one centimetre equal to 10 millimetres. The tool uses those factors, displays rounded equivalents, exposes the size difference to the nearest 1/16 inch when converting to inches, and preserves valid value, source-unit, and target-unit state in the URL. |
| Linked page reviewed | Jul 21, 2026 | Jul 16, 2026 | Jul 28, 2026 | Jul 28, 2026 |
| Next review due | Jan 17, 2027 | Oct 14, 2026 | Jul 28, 2027 | Jul 28, 2027 |
| Inspect | ||||
How to compare
Use the rows to narrow your next check.
- Choose resources that could solve the same job.
- Eliminate access, scope, or jurisdiction mismatches.
- Read each limitation before following the source.
- Verify project-specific claims with the source or provider.