Compare two to four resources
Compare textile resources.
Review access, scope, source evidence, and limitations side by side before choosing what to inspect next.
This is a working table, not a ranking, recommendation, or provider approval.
Selected resources
4 resources selected.
Swipe the table sideways to inspect all 4 routes
| Decision field | PaidCLOGlobalRemove | Free downloadSeamly2DGlobalRemove | Open accessAustralia Basic Patternmaking CompetencyAustralia · OceaniaRemove | Open accessSeam Allowance ConverterGlobalRemove |
|---|---|---|---|---|
| Decision fit | ||||
| Primary job | Find patterns & fit | Find patterns & fit | Find patterns & fit | Find patterns & fit |
| Also useful for | No additional job recorded | No additional job recorded | No additional job recorded | No additional job recorded |
| Area | Patterns & fit | Patterns & fit | Patterns & fit | Patterns & fit |
| Best for | Individual and team 3D garment prototyping | Digital pattern drafting | Scoping training, hiring, assessment, or evidence requirements for basic textile-product pattern development and testing in Australia | Translating a seam allowance already stated by a pattern or controlled specification |
| Know before using | A virtual sample or coloured fit map is not proof of physical fit, comfort, construction quality, manufacturability, or graded-size approval. Results depend on pattern geometry, sewing, avatar measurements and pose, fabric physical-property data, trims, mesh, and simulation settings. Current releases have substantial hardware and learning requirements; validate representative fabrics, bodies, movements, and sewn samples physically. | Patternmaking knowledge, controlled measurement files, production conventions, and sewn fit testing are still required. The software does not validate body measurements, ease, balance, grading rules, fabric behavior, construction, or product fit. The project currently labels its user wiki manual as needing updates, so confirm current commands and file behavior against the installed release and active support channels. | This is a competency and assessment reference, not an instructional course, pattern file, qualification by reading, provider recommendation, professional license, or proof that a person can perform the work. The route does not establish enrollment availability, teaching quality, fees, support, recognition outside Australia, or product-specific fit. Confirm the current unit status, packaging rules, prerequisites, registered provider, assessment conditions, local requirements, and actual evidence before relying on it. | This is a unit-translation reference. It does not select, approve, or change a seam allowance; establish a universal fraction; interpret an unstated cutting or stitching line; or replace the exact pattern version, controlled specification, material and seam evidence, sample, production method, equipment, tolerance, or release authority. |
| Practical access | ||||
| For | Both | Both | Both | Both |
| Location or jurisdiction | Global | Global | Australia · Oceania | Global |
| Access | Paid | Free download | Open access | Open access |
| Format | Software | Software | Reference | Stitch Authority |
| Source type | First-party platform | Open-source project | Official registry | Stitch Authority |
| Source and review | ||||
| What the source establishes | CLO's current product and support documentation covers linked 2D pattern work and 3D garment simulation on avatars, grading review by size, fabric and garment visualization, fit maps for stress, strain, pressure, and tightness, and rendering and presentation output. Current system requirements publish separate Windows and Apple Silicon baselines and higher recommendations for complex simulation and rendering. | The maintained Seamly2D repository identifies the application as GPLv3+ open-source patternmaking software for Windows, macOS, and Linux. It reads multi-size measurement files for standardized sizes and individual measurement files for custom-fit work, publishes downloadable builds and releases, and links an active website and user forum. | Australia's National Training Register publishes current unit MSTAT3002, Develop patterns using basic patternmaking principles. The release document describes interpreting textile-product design specifications, considering fabric performance, selecting tools and equipment, developing patterns, testing the result, and making alterations. Release 1 was generated December 22, 2022 and merged two earlier units. Current Australian apparel and live-production qualifications list MSTAT3002, while the current diploma also exposes advanced individual-fit, alteration, and fit-model units. | NIST states that one inch is exactly 25.4 millimetres, and the SI decimal relationship makes one centimetre equal to 10 millimetres. The tool uses those factors, displays rounded equivalents, exposes the size difference to the nearest 1/16 inch when converting to inches, and preserves valid value, source-unit, and target-unit state in the URL. |
| Linked page reviewed | Jul 21, 2026 | Jul 21, 2026 | Jul 16, 2026 | Jul 28, 2026 |
| Next review due | Jan 17, 2027 | Jan 17, 2027 | Oct 14, 2026 | Jul 28, 2027 |
| Inspect | ||||
How to compare
Use the rows to narrow your next check.
- Choose resources that could solve the same job.
- Eliminate access, scope, or jurisdiction mismatches.
- Read each limitation before following the source.
- Verify project-specific claims with the source or provider.