Compare two to four resources
Compare textile resources.
Review access, scope, source evidence, and limitations side by side before choosing what to inspect next.
This is a working table, not a ranking, recommendation, or provider approval.
Selected resources
3 resources selected.
Swipe the table sideways to inspect all 3 routes
| Decision field | Open accessAustralia Basic Patternmaking CompetencyAustralia · OceaniaRemove | Open accessQUT TextileR Knowledge BaseAustralia · OceaniaRemove | Open accessSeam Allowance ConverterGlobalRemove |
|---|---|---|---|
| Decision fit | |||
| Primary job | Find patterns & fit | Choose materials | Find patterns & fit |
| Also useful for | No additional job recorded | No additional job recorded | No additional job recorded |
| Area | Patterns & fit | Materials | Patterns & fit |
| Best for | Scoping training, hiring, assessment, or evidence requirements for basic textile-product pattern development and testing in Australia | Comparing common fibre types and blends by typical use and care before choosing a project material, then following the cited source when the decision needs testing or current claim evidence | Translating a seam allowance already stated by a pattern or controlled specification |
| Know before using | This is a competency and assessment reference, not an instructional course, pattern file, qualification by reading, provider recommendation, professional license, or proof that a person can perform the work. The route does not establish enrollment availability, teaching quality, fees, support, recognition outside Australia, or product-specific fit. Confirm the current unit status, packaging rules, prerequisites, registered provider, assessment conditions, local requirements, and actual evidence before relying on it. | This is a general educational reference, not a neutral material ranking, complete fibre encyclopedia, specification, test report, sourcing database, lifecycle assessment, certification, safety procedure, or proof of a product claim. Coverage and citation depth vary by page, and some environmental, care, performance, or end-of-life statements are broad. Fibre name alone does not establish a fabric's construction, blend percentage, finish, quality, behavior, or suitability. Confirm the exact composition, construction, finish, care label, sample behavior, test evidence, certification scope, and project requirements with the responsible supplier, scheme, laboratory, or specialist. | This is a unit-translation reference. It does not select, approve, or change a seam allowance; establish a universal fraction; interpret an unstated cutting or stitching line; or replace the exact pattern version, controlled specification, material and seam evidence, sample, production method, equipment, tolerance, or release authority. |
| Practical access | |||
| For | Both | Both | Both |
| Location or jurisdiction | Australia · Oceania | Australia · Oceania | Global |
| Access | Open access | Open access | Open access |
| Format | Reference | Reference | Stitch Authority |
| Source type | Official registry | First-party platform | Stitch Authority |
| Source and review | |||
| What the source establishes | Australia's National Training Register publishes current unit MSTAT3002, Develop patterns using basic patternmaking principles. The release document describes interpreting textile-product design specifications, considering fabric performance, selecting tools and equipment, developing patterns, testing the result, and making alterations. Release 1 was generated December 22, 2022 and merged two earlier units. Current Australian apparel and live-production qualifications list MSTAT3002, while the current diploma also exposes advanced individual-fit, alteration, and fit-model units. | The live QUT index says the knowledge base is designed to help users choose an appropriate textile and extend garment use. It links 14 topics: nine named fibre pages, textile blends, re-making, reuse, recycling, and repair. Checked silk, polyester, wool, and blend pages organize information under overview, common fabrics, context of use, care, recycling, and further reading where applicable. QUT identifies TextileR as a research group and publishes named researchers, publications, objectives, and a direct contact. | NIST states that one inch is exactly 25.4 millimetres, and the SI decimal relationship makes one centimetre equal to 10 millimetres. The tool uses those factors, displays rounded equivalents, exposes the size difference to the nearest 1/16 inch when converting to inches, and preserves valid value, source-unit, and target-unit state in the URL. |
| Linked page reviewed | Jul 16, 2026 | Jul 26, 2026 | Jul 28, 2026 |
| Next review due | Oct 14, 2026 | Jan 22, 2027 | Jul 28, 2027 |
| Inspect | |||
How to compare
Use the rows to narrow your next check.
- Choose resources that could solve the same job.
- Eliminate access, scope, or jurisdiction mismatches.
- Read each limitation before following the source.
- Verify project-specific claims with the source or provider.