Compare two to four resources
Compare textile resources.
Review access, scope, source evidence, and limitations side by side before choosing what to inspect next.
This is a working table, not a ranking, recommendation, or provider approval.
Selected resources
3 resources selected.
Swipe the table sideways to inspect all 3 routes
| Decision field | Open accessZDHC Manufacturing Restricted Substances ListGlobalRemove | Open accessAustralia Basic Patternmaking CompetencyAustralia · OceaniaRemove | Free downloadAFIRM Restricted Substances ListGlobalRemove |
|---|---|---|---|
| Decision fit | |||
| Primary job | Check standards | Find patterns & fit | Check standards |
| Also useful for | No additional job recorded | No additional job recorded | No additional job recorded |
| Area | Standards | Patterns & fit | Standards |
| Best for | Chemical-input controls during manufacturing | Scoping training, hiring, assessment, or evidence requirements for basic textile-product pattern development and testing in Australia | Building a product chemical-restriction baseline |
| Know before using | The MRSL controls manufacturing inputs within its stated scope. One formulation status or self-generated facility inventory report does not by itself prove a complete or externally verified chemical inventory, actual order recipe, implementation, worker protection, emissions, wastewater performance, or finished-product compliance. Verify the current version, law, brand program, safety rules, formulation identity and status, complete facility and order records, inventory-verification state, and finished-product RSL and testing requirements. | This is a competency and assessment reference, not an instructional course, pattern file, qualification by reading, provider recommendation, professional license, or proof that a person can perform the work. The route does not establish enrollment availability, teaching quality, fees, support, recognition outside Australia, or product-specific fit. Confirm the current unit status, packaging rules, prerequisites, registered provider, assessment conditions, local requirements, and actual evidence before relying on it. | AFIRM states that its list is guidance, not legal advice, an industry standard of care, or a guarantee of completeness or brand acceptance. It does not replace current law, a customer's stricter RSL, manufacturing-input controls, a product-specific risk and sampling plan, accepted laboratory methods, supplier controls, or performance and safety testing. |
| Practical access | |||
| For | Apparel brands | Both | Apparel brands |
| Location or jurisdiction | Global | Australia · Oceania | Global |
| Access | Open access | Open access | Free download |
| Format | Reference | Reference | Reference |
| Source type | Industry organization | Official registry | Industry organization |
| Source and review | |||
| What the source establishes | ZDHC's current scope defines the MRSL as restrictions on intentional use of listed substances in commercial chemical formulations for textile, leather, rubber, foam, adhesive, and trim processing. Covered inputs include cleaners, dyes, auxiliaries, coatings, finishing agents, maintenance, wastewater-treatment, sanitation, and pest-control chemicals. ZDHC identifies version 3.1 as the current official MRSL, distinguishes formulation conformance from finished-product restrictions, and states that an ordinary Performance InCheck facility inventory is self-generated rather than externally verified. | Australia's National Training Register publishes current unit MSTAT3002, Develop patterns using basic patternmaking principles. The release document describes interpreting textile-product design specifications, considering fabric performance, selecting tools and equipment, developing patterns, testing the result, and making alterations. Release 1 was generated December 22, 2022 and merged two earlier units. Current Australian apparel and live-production qualifications list MSTAT3002, while the current diploma also exposes advanced individual-fit, alteration, and fit-model units. | AFIRM's current About page identifies the Apparel and Footwear International RSL Management Group as a member-driven organization collaborating on chemicals management and assigns annual RSL maintenance to its RSL Committee. AFIRM publishes a 2026 multilingual Restricted Substances List for chemicals in finished apparel, footwear, accessories, and related materials, with a material-specific testing matrix. Its FAQ says the list does not cover product-performance testing, distinguishes the finished-product RSL from manufacturing-input lists, and tells suppliers to check each customer's brand-specific requirements and testing acceptance. |
| Linked page reviewed | Jul 30, 2026 | Jul 16, 2026 | Jul 30, 2026 |
| Next review due | Oct 28, 2026 | Oct 14, 2026 | Oct 28, 2026 |
| Inspect | |||
How to compare
Use the rows to narrow your next check.
- Choose resources that could solve the same job.
- Eliminate access, scope, or jurisdiction mismatches.
- Read each limitation before following the source.
- Verify project-specific claims with the source or provider.