Compare two to four resources
Compare textile resources.
Review access, scope, source evidence, and limitations side by side before choosing what to inspect next.
This is a working table, not a ranking, recommendation, or provider approval.
Selected resources
3 resources selected.
Swipe the table sideways to inspect all 3 routes
| Decision field | Open accessSewing Length ConverterGlobalRemove | Open accessAustralia Basic Patternmaking CompetencyAustralia · OceaniaRemove | Open accessZDHC Manufacturing Restricted Substances ListGlobalRemove |
|---|---|---|---|
| Decision fit | |||
| Primary job | Find patterns & fit | Find patterns & fit | Check standards |
| Also useful for | No additional job recorded | No additional job recorded | No additional job recorded |
| Area | Patterns & fit | Patterns & fit | Standards |
| Best for | Translating a length already stated by a pattern, controlled specification, sewing tool, or seam allowance | Scoping training, hiring, assessment, or evidence requirements for basic textile-product pattern development and testing in Australia | Chemical-input controls during manufacturing |
| Know before using | This is a length-unit translation reference. It does not identify the measured feature; select, approve, or change a seam allowance; establish a universal fraction; interpret an unstated cutting or stitching line; or replace the exact pattern version, controlled specification, material and seam evidence, sample, production method, equipment, tolerance, or release authority. | This is a competency and assessment reference, not an instructional course, pattern file, qualification by reading, provider recommendation, professional license, or proof that a person can perform the work. The route does not establish enrollment availability, teaching quality, fees, support, recognition outside Australia, or product-specific fit. Confirm the current unit status, packaging rules, prerequisites, registered provider, assessment conditions, local requirements, and actual evidence before relying on it. | The MRSL controls manufacturing inputs within its stated scope. One formulation status or self-generated facility inventory report does not by itself prove a complete or externally verified chemical inventory, actual order recipe, implementation, worker protection, emissions, wastewater performance, or finished-product compliance. Verify the current version, law, brand program, safety rules, formulation identity and status, complete facility and order records, inventory-verification state, and finished-product RSL and testing requirements. |
| Practical access | |||
| For | Both | Both | Apparel brands |
| Location or jurisdiction | Global | Australia · Oceania | Global |
| Access | Open access | Open access | Open access |
| Format | Stitch Authority | Reference | Reference |
| Source type | Stitch Authority | Official registry | Industry organization |
| Source and review | |||
| What the source establishes | NIST states that 10 millimetres equal 1 centimetre and that one inch is exactly 25.4 millimetres. The tool uses those relationships, displays rounded equivalents, exposes the size difference to the nearest 1/16 inch when converting to inches, and preserves valid value, source-unit, and target-unit state in the URL. | Australia's National Training Register publishes current unit MSTAT3002, Develop patterns using basic patternmaking principles. The release document describes interpreting textile-product design specifications, considering fabric performance, selecting tools and equipment, developing patterns, testing the result, and making alterations. Release 1 was generated December 22, 2022 and merged two earlier units. Current Australian apparel and live-production qualifications list MSTAT3002, while the current diploma also exposes advanced individual-fit, alteration, and fit-model units. | ZDHC's current scope defines the MRSL as restrictions on intentional use of listed substances in commercial chemical formulations for textile, leather, rubber, foam, adhesive, and trim processing. Covered inputs include cleaners, dyes, auxiliaries, coatings, finishing agents, maintenance, wastewater-treatment, sanitation, and pest-control chemicals. ZDHC identifies version 3.1 as the current official MRSL, distinguishes formulation conformance from finished-product restrictions, and states that an ordinary Performance InCheck facility inventory is self-generated rather than externally verified. |
| Linked page reviewed | Jul 30, 2026 | Jul 16, 2026 | Jul 30, 2026 |
| Next review due | Jul 30, 2027 | Oct 14, 2026 | Oct 28, 2026 |
| Inspect | |||
How to compare
Use the rows to narrow your next check.
- Choose resources that could solve the same job.
- Eliminate access, scope, or jurisdiction mismatches.
- Read each limitation before following the source.
- Verify project-specific claims with the source or provider.