Compare two to four resources
Compare textile resources.
Review access, scope, source evidence, and limitations side by side before choosing what to inspect next.
Selected resources
3 resources selected.
Swipe the table sideways to inspect all 3 routes
| Decision field | Open accessZDHC Manufacturing Restricted Substances ListGlobalRemove | Open accessAustralia Basic Patternmaking CompetencyAustralia · OceaniaRemove | PaidCLOGlobalRemove |
|---|---|---|---|
| Decision fit | |||
| Primary job | Check standards | Find patterns & fit | Find patterns & fit |
| Area | Standards | Patterns & fit | Patterns & fit |
| Best for | Chemical-input controls during manufacturing | Scoping training, hiring, assessment, or evidence requirements for basic textile-product pattern development and testing in Australia | Individual and team 3D garment prototyping |
| Know before using | The MRSL controls manufacturing inputs within its stated scope. It does not by itself prove a facility's chemical inventory, implementation, worker protection, emissions, wastewater performance, formulation conformance, or finished-product compliance. Verify the current version, law, brand program, safety rules, chemical-product certificates and status, facility records, and finished-product RSL and testing requirements. | This is a competency and assessment reference, not an instructional course, pattern file, qualification by reading, provider recommendation, professional license, or proof that a person can perform the work. The route does not establish enrollment availability, teaching quality, fees, support, recognition outside Australia, or product-specific fit. Confirm the current unit status, packaging rules, prerequisites, registered provider, assessment conditions, local requirements, and actual evidence before relying on it. | A virtual sample or coloured fit map is not proof of physical fit, comfort, construction quality, manufacturability, or graded-size approval. Results depend on pattern geometry, sewing, avatar measurements and pose, fabric physical-property data, trims, mesh, and simulation settings. Current releases have substantial hardware and learning requirements; validate representative fabrics, bodies, movements, and sewn samples physically. |
| Practical access | |||
| For | Apparel brands | Both | Both |
| Location or jurisdiction | Global | Australia · Oceania | Global |
| Access | Open access | Open access | Paid |
| Format | Reference | Reference | Software |
| Source type | Industry organization | Official registry | First-party platform |
| Source and review | |||
| What the source establishes | ZDHC's current scope defines the MRSL as restrictions on intentional use of listed substances in commercial chemical formulations for textile, leather, rubber, foam, adhesive, and trim processing. Covered inputs include cleaners, dyes, auxiliaries, coatings, finishing agents, maintenance, wastewater-treatment, sanitation, and pest-control chemicals. ZDHC's help centre identifies version 3.1 as the current official MRSL and distinguishes it from restrictions measured in finished products. | Australia's National Training Register publishes current unit MSTAT3002, Develop patterns using basic patternmaking principles. The release document describes interpreting textile-product design specifications, considering fabric performance, selecting tools and equipment, developing patterns, testing the result, and making alterations. Release 1 was generated December 22, 2022 and merged two earlier units. Current Australian apparel and live-production qualifications list MSTAT3002, while the current diploma also exposes advanced individual-fit, alteration, and fit-model units. | CLO's current product and support documentation covers linked 2D pattern work and 3D garment simulation on avatars, grading review by size, fabric and garment visualization, fit maps for stress, strain, pressure, and tightness, and rendering and presentation output. Current system requirements publish separate Windows and Apple Silicon baselines and higher recommendations for complex simulation and rendering. |
| Linked page reviewed | Jul 21, 2026 | Jul 16, 2026 | Jul 21, 2026 |
| Next review due | Oct 19, 2026 | Oct 14, 2026 | Jan 17, 2027 |
| Inspect | |||
How to compare
Use the rows to narrow your next check.
- Choose resources that could solve the same job.
- Eliminate access, scope, or jurisdiction mismatches.
- Read each limitation before following the source.
- Verify project-specific claims with the source or provider.