Compare two to four resources
Compare textile resources.
Review access, scope, source evidence, and limitations side by side before choosing what to inspect next.
Selected resources
4 resources selected.
Swipe the table sideways to inspect all 4 routes
| Decision field | Open accessHook & Needle Diameter ReferenceGlobalRemove | Open accessCanada Textile Labelling GuideCanada · North AmericaRemove | Open accessFreeSewingGlobalRemove | Open accessApparel Grade-Rule & Size-Run Validation RecordGlobalRemove |
|---|---|---|---|---|
| Decision fit | ||||
| Primary job | Learn techniques | Check standards | Find patterns & fit | Find patterns & fit |
| Area | Yarn | Standards | Patterns & fit | Patterns & fit |
| Best for | Checking which U.S. alias the current Craft Yarn Council table gives a known metric package size before confirming project gauge | Starting a Canadian textile-label compliance check | Custom-fit home sewing patterns | Auditing inherited grade rules or controlling a new multi-size pattern release from approved targets through sample evidence |
| Know before using | The reference is not a dimensional measurement, manufacturer inspection, UK or Canadian conversion, steel-hook chart, tool recommendation, yarn assignment, gauge result, or proof that a proposed tool will produce the required fabric. | This is federal guidance, not the controlling legislation, an approved label, a product classification, or legal advice. It does not resolve every exemption, fibre test, origin claim, care label, product-safety rule, provincial language duty, or market-specific requirement. Confirm the current Act and Regulations, Quebec and other applicable rules, the actual article and fibre evidence, and the responsible dealer before sale or import. | A generated pattern is not independent fit evidence or a production-ready graded block. The result still depends on accurate measurements, the selected design and options, ease assumptions, fabric behavior, construction, and representative test garments. An account stores saved patterns and measurement sets, so review the platform's privacy terms before retaining personal measurements. | The record does not create a production grade, supply universal increments or breakpoints, validate a CAD file or fit population, reproduce licensed standards, or replace qualified anthropometric, pattern, technical-design, fit, quality, accessibility, safety, statistical, and user-research review. |
| Practical access | ||||
| For | Makers | Apparel brands | Makers | Apparel brands |
| Location or jurisdiction | Global | Canada · North America | Global | Global |
| Access | Open access | Open access | Open access | Open access |
| Format | Stitch Authority | Reference | Software | Stitch Authority |
| Source type | Stitch Authority | Government guidance | Open-source project | Stitch Authority |
| Source and review | ||||
| What the source establishes | The lookup reproduces the current public Craft Yarn Council metric and U.S. alias rows and follows the Council's warning that company letter and number labels vary; blank aliases remain blank instead of being inferred. | The Competition Bureau guide outlines Canada's Textile Labelling Act and Regulations for prescribed consumer textile articles. It covers fibre percentages and generic names, dealer name and address or CA number, bilingual fibre information, permanent and non-permanent labels, imports, and advertising. The guide also flags additional French-language requirements in Quebec and directs readers to the full Act and Regulations. | FreeSewing's official documentation says the browser editor drafts a selected design in real time from a measurement set rather than scaling or grading a standard-size pattern. Users can adjust design options and export the generated result, including as PDF; saving the pattern to an account is optional and is used to revisit it later. | The guide cites current ISO body-table, size-designation, and garment-measurement boundaries plus two peer-reviewed studies that tested the relationship between conventional grade rules, anthropometric evidence, and garment fit; it requires product-specific target deltas and validation instead of publishing universal increments. |
| Linked page reviewed | Jul 16, 2026 | Jul 21, 2026 | Jul 21, 2026 | Jul 16, 2026 |
| Next review due | Jul 16, 2027 | Oct 19, 2026 | Jan 17, 2027 | Jul 16, 2027 |
| Inspect | ||||
How to compare
Use the rows to narrow your next check.
- Choose resources that could solve the same job.
- Eliminate access, scope, or jurisdiction mismatches.
- Read each limitation before following the source.
- Verify project-specific claims with the source or provider.