Compare two to four resources
Compare textile resources.
Review access, scope, source evidence, and limitations side by side before choosing what to inspect next.
Selected resources
4 resources selected.
Swipe the table sideways to inspect all 4 routes
| Decision field | Open accessApparel Grade-Rule & Size-Run Validation RecordGlobalRemove | Open accessYarnSubGlobalRemove | Open accessNMSU Pattern Alteration GuideUnited States · North AmericaRemove | PaidCLOGlobalRemove |
|---|---|---|---|---|
| Decision fit | ||||
| Primary job | Find patterns & fit | Choose materials | Find patterns & fit | Find patterns & fit |
| Area | Patterns & fit | Yarn | Patterns & fit | Patterns & fit |
| Best for | Auditing inherited grade rules or controlling a new multi-size pattern release from approved targets through sample evidence | Replacing a discontinued or unavailable yarn | Checking a common flat-pattern alteration method | Individual and team 3D garment prototyping |
| Know before using | The record does not create a production grade, supply universal increments or breakpoints, validate a CAD file or fit population, reproduce licensed standards, or replace qualified anthropometric, pattern, technical-design, fit, quality, accessibility, safety, statistical, and user-research review. | A suggested match is a data-based shortlist, not proof that the yarn suits the pattern or maker. Yarn records can be incomplete or wrong, prices and availability vary by market, and the site uses affiliate links. Confirm the required gauge, total length, fibre behavior, construction, care, color, dye lot, accessibility, and seller terms, then make and assess a representative swatch before committing. | The guide's general womenswear diagrams and ease ranges are teaching examples, not an individual diagnosis, current commercial-pattern specification, or complete fitting course. A named symptom can have several causes, and alterations may affect adjoining seams, facings, collars, sleeves, balance, and style. Verify the method against the exact pattern and test the coordinated changes on a muslin. | A virtual sample or coloured fit map is not proof of physical fit, comfort, construction quality, manufacturability, or graded-size approval. Results depend on pattern geometry, sewing, avatar measurements and pose, fabric physical-property data, trims, mesh, and simulation settings. Current releases have substantial hardware and learning requirements; validate representative fabrics, bodies, movements, and sewn samples physically. |
| Practical access | ||||
| For | Apparel brands | Makers | Makers | Both |
| Location or jurisdiction | Global | Global | United States · North America | Global |
| Access | Open access | Open access | Open access | Paid |
| Format | Stitch Authority | Reference | Reference | Software |
| Source type | Stitch Authority | First-party platform | Government guidance | First-party platform |
| Source and review | ||||
| What the source establishes | The guide cites current ISO body-table, size-designation, and garment-measurement boundaries plus two peer-reviewed studies that tested the relationship between conventional grade rules, anthropometric evidence, and garment fit; it requires product-specific target deltas and validation instead of publishing universal increments. | YarnSub's official FAQ says its matching software compares gauge, texture, yarn weight and density, fibre content, and fibre qualities such as drape and softness. Discontinued yarns remain searchable as starting points but are excluded from suggested replacements, and each yarn page provides a route to report source-data problems. | New Mexico State University's current Cooperative Extension Guide C-228 explains three alteration methods, folding out fullness, slashing and spreading or overlapping, and redrawing darts or seams. It provides illustrated bodice, sleeve, skirt, and trouser examples and tells readers to compare body measurements plus intended ease with the pattern while preserving grain, design lines, related-piece changes, and comfort ease. | CLO's current product and support documentation covers linked 2D pattern work and 3D garment simulation on avatars, grading review by size, fabric and garment visualization, fit maps for stress, strain, pressure, and tightness, and rendering and presentation output. Current system requirements publish separate Windows and Apple Silicon baselines and higher recommendations for complex simulation and rendering. |
| Linked page reviewed | Jul 16, 2026 | Jul 21, 2026 | Jul 21, 2026 | Jul 21, 2026 |
| Next review due | Jul 16, 2027 | Jan 17, 2027 | Oct 19, 2026 | Jan 17, 2027 |
| Inspect | ||||
How to compare
Use the rows to narrow your next check.
- Choose resources that could solve the same job.
- Eliminate access, scope, or jurisdiction mismatches.
- Read each limitation before following the source.
- Verify project-specific claims with the source or provider.