Compare two to four resources
Compare textile resources.
Review access, scope, source evidence, and limitations side by side before choosing what to inspect next.
Selected resources
2 resources selected.
Swipe the table sideways to inspect all 2 routes
| Decision field | Open accessFabric Purchase PlannerGlobalRemove | Open accessSeam Allowance ConverterGlobalRemove |
|---|---|---|
| Decision fit | ||
| Primary job | Choose materials | Find patterns & fit |
| Area | Materials | Patterns & fit |
| Best for | Documenting how a pattern-based fabric quantity becomes an order length | Working between pattern systems |
| Know before using | The planner adds and rounds user-entered lengths; it does not create a cutting layout, infer shrinkage or matching allowances, compensate for a width change, establish usable width, or prove that the order quantity is sufficient. | A unit reference; the correct allowance depends on material, seam type, and production method. |
| Practical access | ||
| For | Makers | Both |
| Location or jurisdiction | Global | Global |
| Access | Open access | Open access |
| Format | Stitch Authority | Stitch Authority |
| Source type | Stitch Authority | Stitch Authority |
| Source and review | ||
| What the source establishes | NIST defines 1 yard as exactly 0.9144 metre. Sewing & Craft Alliance guidance ties an applicable cutting layout to the exact view, size, fabric width, and nap condition and recommends layout work when listed conditions do not fit the project. | The linked tool or guide is maintained inside Stitch Authority and was checked against its current public interface. |
| Linked page reviewed | Jul 16, 2026 | Jul 15, 2026 |
| Next review due | Jul 16, 2027 | Jul 15, 2027 |
| Inspect | ||
How to compare
Use the rows to narrow your next check.
- Choose resources that could solve the same job.
- Eliminate access, scope, or jurisdiction mismatches.
- Read each limitation before following the source.
- Verify project-specific claims with the source or provider.